Every prop from SPS10 to V4 runs the same tube specification — an outer tube of Ø60.5 mm × 2.0T sliding over an inner tube of Ø48.6 mm × 2.2T. Only the tube lengths change, so spares and pins interchange across the entire range.
Props are supplied on a 140 × 140 × 5.4T base plate, with a female thread of 30 mm or more and a support pin of 11 mm diameter or more.
General type. Tube lengths and installed lengths in metres.
| Item | Outer Pipe | Inner Pipe | Min. Length | Max. Length | Overlap | Weight | Banding Unit |
|---|---|---|---|---|---|---|---|
| SPS10 | 0.6 m | 0.6 m | 0.6 m | 1.0 m | 0.2 m | 5.5 kg | 50 ea |
| SPS30 | 0.8 m | 0.8 m | 1.0 m | 1.4 m | 0.2 m | 6.0 kg | 50 ea |
| SPS40 (VO) | 1.2 m | 1.2 m | 1.2 m | 2.2 m | 0.2 m | 8.5 kg | 50 ea |
| SPS50 | 1.5 m | 1.5 m | 1.5 m | 2.7 m | 0.3 m | 9.5 kg | 50 ea |
| V1 | 1.7 m | 1.8 m | 1.8 m | 3.2 m | 0.3 m | 11.0 kg | 50 ea |
| V2 | 1.7 m | 2.0 m | 2.0 m | 3.4 m | 0.3 m | 12.0 kg | 50 ea |
| V3 | 1.7 m | 2.4 m | 2.4 m | 3.8 m | 0.3 m | 13.0 kg | 50 ea |
| V4 | 1.7 m | 2.6 m | 2.6 m | 4.0 m | 0.3 m | 14.0 kg | 50 ea |
Outer tube Ø60.5 mm × 2.0T · inner tube Ø48.6 mm × 2.2T. Where the maximum extension is under 2.5 m, the minimum tube overlap is 150 mm; otherwise the outer tube engagement is 300 mm or more.
140 × 140 × 5.4T
30 mm length or more
Ø11 mm or more
300 mm or more
(150 mm minimum under 2.5 m)